Armies Army

Armies Army
15mm Sci Fi Metal Miniatures

Wednesday 18 December 2013

Today Канюк конструкторское бюро are proud to announce completion of the prototype for the next generation of the Влади́мир Влади́мирович Пу́тин1 (VVP1), the Влади́мир Влади́мирович Пу́тин2, (VVP2). Following combat feedback from the courageous commanders of the glorious RUSK tank regiments, additional reactive armour, a powerful 130mm main gun, Point Defence System and many other minor modifications have been made to the battle proven VVP1. With these improvements, the VVP2 will surely dominate the battlefield as we continue the struggle of this current Supreme Patriotic War. As always it is an honour to provide our brave soldiers with the best we can give.
Press release issued on behalf of the Director, Канюк конструкторское бюро and authorisation granted for distribution via all approved news channels under the control of the Media Relations Department of Armies Army.


Big thanks to Andrew....again :)


Keith

9 comments:

  1. Estimated dimensions? Estimated dimensions??

    Most SF tanks out there in 15mm range from 35 to 50 mm in front width and from 65 to 80 mm (tops 85 mm) in lenght.

    ReplyDelete
  2. 80.62 x 38.92 x 25.26 mm

    to be precise...

    41mm gun barrel or 47mm gun barrel

    :)

    ReplyDelete
  3. Usually I calculate measures barrel-less...my figures were simply for the hulls...

    ReplyDelete
  4. Waaaah! Please, will you give me a figure for the tank's hull dimensions? Even in inches!!!!

    ReplyDelete
  5. 3 11/64 inch x 1 17/32 inch x 1 inch

    give or take....

    ReplyDelete
  6. 79mm x 29mm??? That's VEEEEERY narrow...not even my candy-tubes 1/120 M-60s have such a limited frontal encumbrance...

    ReplyDelete
    Replies
    1. Ok, forgive the rant, I misread the inch/mm tape...it's 38mm not 29mm.

      Close enough to 40mm.

      Delete
  7. This comment has been removed by the author.

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete